What are the requirements for the installation of solar street lamp poles?

Solar street lamp not only lighting engineering, but also in the equipment requirements, such as street lamp pole, solar panel, cable operation cost and other energy consumption. Therefore, it is very important to establish the foundation of street lamp post. When the lamp is lifted to the top of the foundation, slowly lower the lamp, rotate the lamp pole together, adjust the lamp cap to face the road, and align the long hole on the flange plate with the anchor bolt. After the flange plate falls on the foundation, install 30 flat washers (or 24 flat washers), 30 spring washers (or 24 spring washers) and M30 (or M24) nuts in turn, and adjust the straightness of the lamp pole with a level ruler.
We pay more and more attention to the use of traditional street lamps. The main reason is that the power generation of traditional street lamp is low, the illumination brightness is very low, so that people can not see the distance clearly. Therefore, the formation of traffic accidents is very simple. Most of these street lamps are arranged in the same way, and the scenery is no longer beautiful. Therefore, we all focus on the use of better, more energy-saving and environmentally friendly solar street lamps.
As the manager of the whole street lamp system, solar street lamp is the key component of the whole street lamp system. Its biggest function is to manage the battery comprehensively. When choosing a good solar street lamp controller, the key parameters should be set according to the characteristics of the battery, such as overcharge point, over discharge point, recovery connection point, SOC discharge control, etc. since the battery has the characteristics of voltage self recovery, it is particularly necessary to pay attention to the recovery of connection point parameters by the controller. When the battery is in over discharge state, the controller cuts off the load and the battery voltage recovers. If the parameter points of the controller are not set properly, the lamp may flash and shorten the life of the battery and light source.
The life of solar street lamp can reach 100000 hours and the quality is 500000 hours. Therefore, Shenyang xindingtai solar street lamp has been working for a long time, and the brightness it brings is satisfactory. It can be used to illuminate our travel and vehicles. Shenyang solar street lamp construction equipment is simple, but also can save a lot of electricity, investment in other projects, promote the city's social and economic development. In the future, if Chinese lighting enterprises want to enter the field of high-end lighting, it is an insurmountable link to consolidate market share and strengthen independent research and development. Solar street lamp work, like other jobs, is also facing the same dilemma, that is, the lack of high-end skills and high-end products and products. I believe that in the future, how to break through the difficulties of work skills and patent barriers is still the key direction of demand.
In addition to the above points, it is also necessary to consider the structure of all street lamps, especially the calculation of wind resistance and the beauty of all street lamps in combination with urban road planning. In short, there are many factors affecting the performance of solar street lamps. We will not repeat them one by one. In the planning of solar street lighting system, some people often regard the sunshine time as the solar peak time. In fact, it's not right. The result of this kind of planning will lead to the instability of the whole system. As long as we master the detailed climate resources and application conditions, combined with practical experience, we can optimize the system planning and ensure the normal operation of solar street lamps.